Links on CarAudioBible may earn us a commission.

Sub Is Cutting Out at High Volumes? Try these Easy Fixes

10 Reasons Why Your Sub Is Cutting Out at High Volumes
Why Your Sub Is Cutting Out at High Volumes?

When you’re running a subwoofer in your car, it’s important to make sure that it’s cutting out at high volumes. If it’s not, then there are a few potential reasons why this might be happening.

In this blog post, we’ll take a look at 10 of the most common reasons why your sub might be cutting out at high volumes. By understanding these issues, you’ll be able to troubleshoot and fix the problem quickly and easily.

10 Reasons Why Your Sub Is Cutting Out at High Volumes

1. Bad ground

Bad ground

Bad ground is one of the most common reasons why your subwoofer may be cutting out at high volumes. There are a few things that can cause bad ground, but the most common reason is that the wire that connects your subwoofer to the ground is not properly connected.

If the wire that connects your subwoofer to the ground is not properly connected, it can cause a number of problems.

First, it can cause your subwoofer to cut out at high volumes. Second, it can cause your subwoofer to make a buzzing noise. Third, it can cause your subwoofer to produce distorted sound.

There are a few things that you can do to fix bad ground. First, you can check the connection between the wire and the ground. If the connection is loose, you can try to tighten it. Second, you can check the wire itself. If the wire is damaged, you may need to replace it.

2. Amp is in protect mode

Amp is in protect mode 3

Amp in protect mode is a feature that is designed to protect your amplifier from damage.

When the amp is in protect mode, it will shut off if it detects an overload or short circuit. This can help to prevent damage to your amplifier and keep it working properly.

There are a few things that can cause your amplifier to go into protect mode. One of the most common reasons is an overload.

An overload can occur if you try to play your amplifier at a volume that is too loud for it. This can cause the amplifier to overheat and go into protect mode.

Another common reason for an amplifier to go into protection mode is a short circuit. A short circuit can occur if the wires that connect your amplifier to your speakers are not properly connected. This can cause the amplifier to overheat and go into protect mode.

There are a few things that you can do to prevent your amplifier from going into protect mode.

One of the most important things is to make sure that you do not overload it. You should only play your amplifier at a volume that is comfortable for you.

Another thing that you can do to prevent your amplifier from going into protect mode is to make sure that the wires that connect your amplifier to your speakers are properly connected. If you are having trouble with this, you can contact a professional to help you.

3. Voltage problem

Voltage problem

Voltage is one of the most important factors in choosing a subwoofer amplifier. It determines how much power the amplifier can deliver to the subwoofer. 

If the voltage is too low, the amplifier will not be able to produce enough power to drive the subwoofer. The result will be a subwoofer that doesn’t play as loud as it should or that cuts out at high volumes.

4. Amp overheats

One of the most common reasons why your subwoofer may be cutting out at high volumes is because the amplifier is overheating.

When an amplifier overheats, it will often go into thermal protection mode in order to prevent any further damage. Thermal protection mode will cause the amplifier to shut down until it has cooled off, which can take up to an hour.

If your amplifier is overheating,  there are a few things that you can do to help prevent it. One of the most important things is to make sure that there is plenty of airflow around the amplifier.

If the amplifier is enclosed in a cabinet, make sure that there are vents or holes for air to flow through. 

Another thing that you can do to help prevent your amplifier from overheating is to make sure that the Speaker Level Inputs are not turned up too high. 

The Speaker Level Inputs are located on the back of the amplifier, and they allow you to control how much power the amplifier delivers to the subwoofer. If these are turned up too high, it can cause the amplifier to overheat.

If you have checked all of the above and your amplifier is still overheating, you may need to contact a professional to have it serviced.

5. Gain setting is incorrect:

Gain setting is incorrect

Another common reason why your subwoofer may be cutting out at high volumes is because the gain is set too high. The gain is the level of amplification that is applied to the signal that is being sent to the subwoofer.

If the gain is set too high, it can cause the subwoofer to distort the sound. It can also cause the subwoofer to cut out at high volumes. To fix this problem, you will need to turn the gain down.

There are a few things that you need to keep in mind when you are adjusting the gain. First, you need to make sure that you do not set the gain too low.

If you set the gain too low, it can cause the subwoofer to sound muffled. Second, you need to make sure that you do not set the gain too high. If you set the gain too high, it can cause the subwoofer to cut out at high volumes.

In conclusion, incorrect gain setting is another common reason why your subwoofer may be cutting out at high volumes. To fix this problem, you will need to turn the gain down.

6. Sub wires have been shorted:

Sub wires have been shorted

Another common reason why your subwoofer may be cutting out at high volumes is because the wires are shorted. When the wires are shorted, it means that they are not able to carry the full signal. 

This can cause the subwoofer to sound distorted. It can also cause the subwoofer to cut out at high volumes.

There are a few things that you can do to fix this problem. First, you can check the wires. If the wires are damaged, you may need to replace them. Second, you can check the connections. If the connections are loose, you can try to tighten them.

7. Subwoofer is Blown:

Subwoofer is Blown 1

Another common reason why your subwoofer may be cutting out at high volumes is because the subwoofer is blown. 

When a subwoofer is blown, it means that the speaker inside of the subwoofer is not working properly.

This can cause the subwoofer to sound distorted. It can also cause the subwoofer to cut out at high volumes.

There are a few things that you can do to fix this problem. First, you can check the connections. If the connections are loose, you can try to tighten them. Second, you can replace the speaker.

In conclusion, a blown subwoofer is another common reason why your subwoofer may be cutting out at high volumes. 

There are a few things that you can do to fix this problem, but the most common solution is to check the connections and replace the speaker.

8. Wiring trouble:

Wiring trouble

Another common reason why your subwoofer may be cutting out at high volumes is because of a wiring problem.

There are a few things that can cause a wiring problem, but the most common reason is that the wire that connects your subwoofer to the amplifier is not properly connected. 

If the wire that connects your subwoofer to the amplifier is not properly connected, it can cause a number of problems.

First, it can cause your subwoofer to cut out at high volumes. Second, it can cause your subwoofer to make a buzzing noise. Third, it can cause your subwoofer to produce distorted sound.

There are a few things that you can do to fix a wiring problem. First, you can check the connection between the wire and the amplifier. If the connection is loose, you can try to tighten it. Second, you can check the wire itself. If the wire is damaged, you may need to replace it.

In conclusion, a wiring problem is one of the most common reasons why your subwoofer may be cutting out at high volumes. There are a few things that you can do to fix a wiring problem, but the most common solution is to check the connection between the wire and the amplifier.

9. Clipping of the amp:

Clipping of the amp

One of the most common reasons why a subwoofer may cut out at high volumes is due to your amplifier clipping. 

When an amplifier clips, it means that it is being overloaded and is not able to produce the cleanest sound possible. This can cause your subwoofer to sound distorted and can eventually lead to it cutting out.

If you find that your subwoofer is cutting out at high volumes, one of the first things that you should check is your amplifier. If your amplifier is clipping, then you will need to either turn down the volume or get a new amplifier.

10. Overload on Amps

Amplifier overload as power on 1

An amplifier overload is a condition where the amp produces too much power for the connected speaker(s). This can cause distortion in the sound, and can eventually lead to damage to the speaker(s). 

There are a few different ways that an amplifier can overload, but the most common cause is when the volume is turned up too high.

When the volume is turned up too high, the amplifier will start to produce more power than the speaker can handle. This can cause the sound to become distorted, and can eventually lead to damage to the speaker. The best way to avoid this is to only turn the volume up to a level that is comfortable for you.

Another way that an amplifier can overload is if there is a short circuit in the wiring. This can happen if the wires that connect the amplifier to the speaker are not properly connected.

If this happens, the amplifier will try to produce more power than the speaker can handle, and this can cause the sound to become distorted. The best way to avoid this is to make sure that the wires are properly connected.

FAQ’s

Why does my amplifier enter protection mode when I turn up the volume?

There are a few reasons why your amp might go into protection mode when you turn the volume up. One reason is that the amp might be getting too hot. 

If the amp is getting too hot, it will go into protection mode to prevent any damage. Another reason could be that the speakers are drawing too much power from the amp.

If the speakers are drawing too much power, the amp will go into protection mode to prevent any damage to the speakers. Lastly, it could be that there is something wrong with the electrical connection between the amp and the speakers. If there is something wrong with the connection, it could cause the amp to go into protection mode to prevent any damage to either the amp or the speakers.

What are the symptoms of a sub-fuse failure?

If you’re not sure whether your subwoofer is blown, you can test the sound at a low volume to listen for whether your sub has been blown.

If you’re still not sure, or if the problem still persists even after trying the steps below, then it’s best to consult with a professional.

To test the sound at a low volume:

1) Make sure that your audio source is turned off.

2) Turn down the volume on your audio source all the way.

3) Connect the audio cables from your audio source to your subwoofer.

4) Turn on your audio source and slowly turn up the volume until you reach a comfortable listening level.

5) Listen carefully for anything unusual.

Can clipping damage an amplifier?

Clipping can potentially damage a speaker because it introduces large amounts of harmonic distortion into the signal. When a clipped signal is sent to a speaker, the speaker’s cone tries to move backwards and forwards at the same time, which can cause it to break or tear.

Additionally, when a clipped signal is sent to a speaker, it can cause the voice coil to overheat and eventually burn out. So clipping definitely has the potential to damage a speaker.

Related Posts