Links on CarAudioBible may earn us a commission.

How to fix a blown car speaker? (9 Easy Ways)

How to fix a blown car speaker

Are you having trouble with your car speakers? Don’t worry, you’re not alone. A lot of people have this problem, especially since modern cars often come with pretty low-quality audio systems.

The good news is that it’s actually not that hard to fix a blown car speaker. In most cases, you can do it yourself with just a few simple tools and materials.

In this post, we’re going to show you how to fix a blown car speaker. We’ll walk you through the process step-by-step so that you can get your audio system back up and running in no time.

So, if you’re ready to learn how to fix a blown car speaker, let’s get started.

What causes a car speaker to be blown away?

What causes a car speaker to be blown away

Before we show you how to fix a blown car speaker, it’s important to understand what causes them to blow in the first place.

There are actually a few different reasons why car speakers can blow. The most common cause is actually using too much power. If you try to play your audio system too loud, it can cause the speakers to blow.

Another common cause of blown car speakers is a bad connection. If the wires that connect your speakers to your audio system are loose or damaged, it can cause the speakers to blow.

Finally, another common cause of blown car speakers is simply using low-quality speakers. If you use cheap, low-quality speakers, they’re more likely to blow than higher-quality speakers.

How to fix a blown car speaker

Now that you know what can cause a car speaker to blow, let’s talk about how to fix it. In most cases, you can easily fix a blown car speaker yourself with just a few tools and materials.

Here’s what you’ll need to fix a blown car speaker:· A screwdriver· A wire cutter/stripper· Electrical tape· Replacement speakers (optional)

1. Remove the Old Speaker

Remove the Old Speaker

The first step is to remove the old, blown speaker from your car. You can do this by gently prying it out with a screwdriver. Be careful not to damage the surrounding area as you remove the speaker.

2. Cut and Strip the Wires

Cut and Strip the Wires

Once the old speaker is removed, you’ll need to cut and strip the wires that were attached to it. You can do this with a wire cutter/stripper.

3. Check your speaker

Check your speaker

The next step is to take a close look at your speakers. In particular, you’ll want to check for any physical damage. This can include things like cracks, holes, or loose wires.

If you see any damage, it’s likely that this is what’s causing your speaker to blow. In this case, you’ll need to replace the damaged parts before you can continue.

4. Remove Components from Speaker:

How to fix a blown car speaker

Once you’ve inspected your speakers and made sure that there is no physical damage, the next step is to remove all of the components. This includes the speaker grille, any screws or bolts, and the actual speaker itself.

Be careful when removing the speaker, as you don’t want to damage it further.

5. Clean the Speaker without damage to the enclosure:

Clean the Speaker without damage to the enclosure:

Once you have the speaker removed, the next step is to clean it. This will help you to identify the problem and fix it more easily.

Use a soft cloth and some mild soap to clean the speaker. Be sure to remove all of the dirt and grime that has built up on it over time.

6. Detect and correct the problem:

Once you have the speaker cleaned, it’s time to identify the problem. In most cases, the problem will be either a blown voice coil or a damaged diaphragm.

7. Replacing a Blown Voice Coil

Replacing a Blown Voice Coil

If the problem is a blown voice coil, you’ll need to replace it. This is not a difficult task, but it will require some soldering.

Start by removing the old voice coil from the speaker. Then, solder the new voice coil in place. Be sure to use the same type of wire that was used for the old voice coil.

8. Replacing the Diaphragm:

Replacing the Diaphragm

If the problem is a damaged diaphragm, you’ll need to replace it. This is a relatively simple task, but it will require some basic sewing skills.

Start by removing the old diaphragm from the speaker. Then, cut a new piece of fabric to the same size and shape as the old one. Sew the new diaphragm in place, being careful not to damage the speaker.

9. Check the Entire Speaker

Check the Entire Speaker

Once you’ve replaced the damaged parts, it’s time to test the speaker. Hook it up to an audio source and see if it works. If it does, then you’re all done.

If the speaker still doesn’t work, then you may need to replace it entirely.

We hope this guide was helpful.

FAQ

Is it possible to fix a blown car speaker?

It is certainly possible to repair a blown car speaker. The most important thing is to make sure that you have the right tools and equipment for the job.

You’ll also need some knowledge of how to work with electronics and circuits. If you don’t feel comfortable doing the repairs yourself, it may be best to take the speaker to a professional.

There are a number of ways to repair a blown car speaker. One common method is to use an electronic component called a “surge stopper”.

This component helps to protect the speaker from voltage spikes, which can often cause damage when speakers are powered on or off. Another common method is to use a resistor in place of the blown speaker. This can help to reduce sound distortion and improve the overall sound quality of the speaker.

What happens to a speaker when it bursts?

When a speaker blows, it typically happens when the speaker experiences too much signal for too long. This can cause the speaker to overheat and eventually fail. The affected speech may sound distorted or quieter than normal. In some cases, blowing a speaker may also cause physical damage to the device.

Why are my car speakers making a crackling sound?

There are a few reasons why your car speakers might be crackling. The most common reason is a loose connection between the speaker and the wire.

Over time, these connections can become loose and cause interference in the signal. Another possibility is that the speaker itself is damaged and causing the crackling sound. However, this is less common than a problem with the connection.

If you suspect that the speaker is damaged, you can try replacing it with a new one to see if that fixes the issue. Finally, it’s possible that there is something wrong with your car stereo system itself. If you have checked all of the connections and replaced any damage speakers, but the problem persists, it’s best to take your car to a professional to have them

CarAudioBible.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com