CarAudioBible is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More.

How to Bypass a DVD Player While Driving Car

How to Bypass a DVD Player While Driving Car
How to Bypass a DVD Player While Driving Car

I was on a road trip a few weeks ago and I wanted to watch a DVD on my double din stereo, but I couldn’t get the DVD to play. It was very frustrating because I couldn’t see the screen from the driver’s seat. After doing some research, I found out that there is an easy way to bypass a DVD player while driving your car. In this blog post, I am going to share with you how to do it. So, if you are ever in a similar situation, you will know what to do. Enjoy!

How to Bypass a DVD Player While Driving Car

Method 1: Installing a Toggle Switch

This method requires some basic wiring skills, but is a more permanent solution than the second method.

1. Disconnect the negative battery terminal to avoid electrocution.

2. Remove the console panel or trim around the DVD player so that you have access to the wires leading to and from the player.

3. Find the wire that supplies power to the DVD player when the ignition is in the “ACC” or “On” position. This wire will usually be green or yellow.

4. Use a wire tap or splice this wire and connect it to one side of a toggle switch.

5. Run a new wire from the other side of the toggle switch to a good ground point on the chassis of your car.

6. Replace the trim panel or console and test the switch by turning it on and off. The DVD player should only power on when the switch is in the “On” position.


Method 2: Using Ground Wire

Aftermarket Car Stereo Wire Colors Guide

Here’s what you’ll need:

• A ground wire

• A few tools (screwdriver, wire stripper/cutter)

This method is the easiest way to bypass a DVD player while driving your car. All you need is a ground wire and a few tools.

First, disconnect the ground wire from the battery. Next, take the ground wire and connect it to the chassis of the car. Once you have done that, reconnect the ground wire to the battery.

Finally, turn on your DVD player and start playing your movie or TV show. You should now be able to see the screen from the driver’s seat without any issues.

If you are still having trouble bypassing a DVD player while driving your car, there may be an issue with your stereo. In this case, it might be best to consult a professional who can help diagnose and fix the problem for you. However, if everything else is working properly, then this method should do the trick and enable you to enjoy movies or TV shows on long road trips!

Related Article:


Method 3: Installing DVD Player Bypassing Kit

Bypass a DVD Player While Driving Car

If you are unable to bypass a DVD player while driving your car using the methods mentioned above, then another option is to install a DVD player bypassing kit. These kits work by cutting power to the unit when it is not in use, thereby preventing the screen from turning on and distracting you while driving.

To install a DVD player bypassing kit, first disconnect the negative battery terminal to avoid electrocution. Next, follow the instructions that come with the kit to properly wire it into your car’s electrical system. Once you have done that, reconnect the negative battery terminal and test the unit by turning on your DVD player. The screen should not turn on when the player is not in use, allowing you to safely watch your movies or TV shows while on the road.

Overall, whether you want to install a toggle switch, use a ground wire, or simply purchase a DVD player bypassing kit, there are several ways to easily bypass a DVD player while driving your car. So don’t let this frustrating issue prevent you from enjoying your favorite media on long road trips! Try one of these methods and see which one works best for you.

FAQs

How can I watch movies in the car while driving?

There are many ways to watch movies in the car while driving. One of the easiest and most convenient options is to use a smartphone or tablet that has a large screen and can play videos. 

Many modern smartphones and tablets include software designed for watching movies on long drives, making it easy to select a movie and start watching it right away. Another option is to use a laptop or DVD player. 

These devices can connect to the car’s entertainment system, allowing you to watch movies on a large screen and even listen to sound through your car’s speakers. You could also consider investing in a dedicated device for watching movies in the car. 

These devices are typically portable DVD players that connect directly with your car and are designed specifically for use on long drives. No matter which option you choose, you can enjoy watching movies in the car while driving with ease and convenience.

How do you bypass DVD parking hookup?

There are a few ways that you can bypass the DVD parking hookup in your car. One option is to use a portable DVD player that connects directly to your car stereo system. 

This will allow you to watch movies without having to go through the hassle of connecting the DVD player to the car. Another option is to use a laptop or tablet device, which can be connected to the car either through a cable or via Bluetooth. 

You may also consider using an in-car entertainment system or streaming service, which will provide a seamless and convenient way to watch movies while on the road. 

Ultimately, the best approach will depend on your specific needs and preferences, so you should consider trying out different options to find the one that works best for you.

Can in dash DVD players play while driving?

Most in dash DVD players are designed to be used while the car is parked, as they can be a distraction if used while driving. 

However, there are some in dash DVD players that come with special features that allow them to be used while the car is in motion. 

These units typically have larger screens and may even come with mounting brackets so that they can be easily viewed from the driver’s seat.

Additionally, in dash DVD players with motion-sensing technology may be able to automatically detect when the car is moving and adjust accordingly, so that you can watch videos without having to worry about accidentally triggering any dangerous features. 

Ultimately, whether or not an in dash DVD player can be used while driving will depend on the specific model and features. You should check with the manufacturer to see if your particular model is designed for use while driving.

How do you bypass parking brake input?

There are a few ways that you can bypass the parking brake input on your car’s DVD player. One option is to use a portable DVD player that connects directly to your car stereo system. 

This will allow you to watch movies without having to go through the hassle of connecting the DVD player to the car. another option is to use a laptop or tablet device, which can be connected to the car either through a cable or via Bluetooth. 

You may also consider using an in-car entertainment system or streaming service, which will provide a seamless and convenient way to watch movies while on the road. 

Ultimately, the best approach will depend on your specific needs and preferences, so you should consider trying out different options to find the one that works best for you.

Where do I connect the parking brake wire?

The parking brake wire on a car’s DVD player typically needs to be connected to the vehicle’s brake light in order to work properly. You can usually find the brake light by opening up the car’s hood and tracing the wires from the back of the headlight assembly. 

Once you have located the brake light, you should be able to easily identify the corresponding wire on the DVD player. Once you have located the wire, you can then connect it to the brake light using a splice connector or an electrical tap.  

Once the connection is made, you should be able to use the parking brake feature on your DVD player without any issues. 

However, it is important to exercise caution when making this type of connection, as working with electrical wiring can be dangerous if you are not familiar with the process. 

It is best to consult a professional car audio installer or mechanic if you have any questions or concerns about connecting the parking brake wire on your DVD player.

What color is the parking brake wire?

There is no standard color for the parking brake wire, as it can vary depending on the make and model of your car. Some vehicles may have a yellow or black wire that is used for this purpose, while others may use a different color entirely. 

To determine which color corresponds to the parking brake wire on your particular vehicle, you will need to consult your car’s wiring diagram. This can usually be found in the owner’s manual or online. Once you have located the wiring diagram, you should be able to easily identify the parking brake wire based on its color. 

If you are still having trouble locating the parking brake wire, you may want to consult a professional car audio installer or mechanic for assistance.

What is the pink wire for on a car stereo?

The pink wire on a car stereo is typically used for powering accessories that are separate from the stereo itself. This could include things like satellite radio receivers, amplifiers, or other external devices. Depending on the specific model of your car stereo, you may be able to connect different types of accessories using the pink wire, or you may need to use a different colored wire to do so. 

You should consult the owner’s manual or the manufacturer’s website to learn more about which accessories can be connected using the pink wire on your car stereo. In some cases, you may need to purchase an adapter or accessory that allows you to make this type of connection, so it is important to do your research and ensure that you have all of the necessary components before attempting to connect your accessories.

If you are still having trouble making a connection, you may want to enlist the help of a professional car audio installer or mechanic.

How do I bypass the Alpine parking brake?

There are a few different ways to bypass the parking brake on an Alpine car stereo. One option is to use an adapter that allows you to connect your stereo directly to the vehicle’s wiring without using a brake light signal. 

This type of adapter can typically be purchased online or from your local car audio retailer, and should allow you to easily bypass the Alpine parking brake. 

Another option is to use a wireless remote control to bypass the brake, though this method may not be compatible with all models of Alpine stereo. 

You can also try using a switch or jumper wire to bypass the parking brake, but this should only be attempted if you are familiar with car stereo wiring and comfortable working with electrical components. 

If you are still having trouble bypassing the Alpine parking brake, you may want to consult a professional car audio installer or mechanic for assistance.

Why does my car radio shut off when I hit the brakes?

There could be a number of different reasons why your car radio shuts off when you hit the brakes. One possible cause is an issue with the wiring or connection between your radio and your car’s electrical system.

This could be due to a damaged, loose, or corroded connector, or it may simply be related to wear and tear over time. Another potential issue could be that the parking brake wire on your car stereo is not functioning properly, which can sometimes occur if there is a problem with the brake light signal. 

In some cases, this may be caused by faulty wiring in your vehicle’s electrical system, or it could indicate that there is something wrong with the brake light switch itself. 

If you are unable to determine what is causing your radio to shut off when you hit the brakes, you may want to consult a professional car audio installer or mechanic for assistance.